How to Water Narrow Strip of Lawn- Best DIYs to Try Now

Do you have a strip of grass that runs between your driveway and the neighbors? Do you waste most of your driveway water? Then you have come to the right place. Let’s know how to water narrow strip of lawn some easy ways.

Learning how to garden in a narrow strip in the middle of your sidewalk and street and watering the garden by conserving water can be a challenge.

From here, you can learn and get some ideas on how to irrigate your grass strip or narrow strip in the middle of the road. You can have a beautiful garden without wasting much water.

In the middle of your home or on the side of the road, it is becoming more and more essential to provide rules for conserving water by efficiently supplying water and reducing waste.

How to Water Narrow Strip of Lawn

The methods here are effortless for you to make with your own hands, and the tools used are readily available so they can be easily collected.

Use of Plastic Bottles

Among the various ways to use plastic bottles for irrigation, there are three most common methods for assembling and handling:

Method- 1

Fill a plastic bottle with a volume of 2 liters with water, leaving some space at the top of the container. Place a suitable piece of foam around the neck instead of the cap. Place a bottle under the root under the tree.

Provide water in these national containers throughout the region for each planting crop. Once the bottles are empty, they need to will be refilled.

Method- 2

Cut off the bottom of the bottle, but not totally – to get something wholly dry (this will save water from evaporating from the ground and the sun). The bottom can cut off entirely if desired.

Tighten the plug tightly, and make small holes around the neck at the top of the bottle to let the water out. Such can be made directly into the cork.

*When watering sandy soils, two holes will suffice, and four are requiring for loamy soils.

Bury the bottle at a depth of 15 cm between the seedlings, while the emerging bottom will be at the top, and the neck will be at the bottom. Prevent the holes from freezing; it is recommending to place dry grass under them.

Method- 3

Cut the bottom of the bottle and make a water hole in the cork. Some gardens leave the cork intact and only slightly unscrew it so that the water flows slowly.

Make a support-holder: Install a holder-slingshot from both ends of the bed and place a crossbar on top. Hang the bottles around their necks and pour water into them.

Cover the soil at the bottom of the bottle with water droplets on top, cover with a small piece of film and sprinkle it with the earth. This is necessary so that the drops fall into the film and already flow from it to the ground, and it does not corrode.

Advantages of Using Plastic Bottles

The use of plastic bottles in the garden for irrigation will save significantly on the purchase of expensive equipment. Moreover, with the help of such a system, it is possible to spray the whole site, not just individual beds.

The advantages of the “bottle” system are:

  • The soil depth is prescript to one meter.
  • The bottles can be used both in open areas and in greenhouses;
  • There is no change in the composition of the soil.
  • Liquid topdressing can be adding.
  • Unlimited access to water does not allow plants to “starve.”
  • It gives you water not only in the garden but also in the garden plants and shrubs and trees.

Using Micro Irrigation

This project is effortless to process and use. Finding the necessary supplies is easy and relatively inexpensive.

These projects include:

* poly tee fitting 1/2 ″, * hole punch * 360-degree bubblers, * poly tubing 1/2 ″, * tubing end closures (2) 1/2 ″, * sod staples (to keep poly tubing in place)


  • The first step is to attach the 1/2″ poly tee to the existing sprinkler. Now attachment to the soil ‍removes the existing sprinkler head by adding a small riser to the pipe to increase the point level—this tv easy screws directly to the PVC riser.
  • You will attach the poly pipe to the tee by holding the pipe up to the fitting and screwing the locking collar. Then turning this collar firmly and attaches the pipe to the water source.
  • You take ½” poly tee, and the poly tee ½ʹ allows you to send runs of poly tubing ½ʹ in two directions off the mainline, perfect for narrow strip irrigation situations.
  • The poly tubing ½ʹ is easy to unroll and cut with scissors. You can do this on a warm, sunny day, the pipe is much more flexible and tends to “stay put” better. Don’t worry if it is cold, though! You know sod staples will help to secure the poly pipe in this place.
  • There is an option to plant at this point to you will install emitters and come back for transplanting later. You can install these emitters easily. The bright orange you can give hole punch is pushed through the poly pipe without much effort.
  • You can listen to the small popping noise that indicates the plastic has been punched through and is ready for the emitter.
  • Rainbird’s 360-degree bubblers spread water up to 3′ in diameter and are you adjusted simply by turning the top cap portion of the emitter to decrease flow.
  • You give pushed this emitter and the emitter pushed into the hole, and the barb on end will keep it firmly in place.
  • Install the bubblers near each of the plants and open the top cap to allow water to spray. Continuing down the entire strip adds nine emitters total for this area.
  • This is the final step for using the closures 1/2ʹ on each open end of this pipe. These pieces keep the pipe kinked off, so there is no leaking from the ending.

The micro-irrigation bubblers need adequate pressure inside the poly pipe, and the closures ensure this happens.


When everything is fine, turn on the water and see what happens. So, we can say that this project will save a lot of time and water in the future.

Frequently Asked Questions

Ques: Why use the methods?

Ans: These methods are very easy and useful. Finding the necessary supplies is easy and fair, inexpensive, and readily available. If you want, you can do the work yourself.

Ques: Will these methods work well?

Ans: This will definitely work if you can provide the methods in the right way.

Ques: Is it possible to prevent water wastage by using these methods?

Ans: We think these methods are the best to prevent water wastage.

Ques: Where can be used?

Ans: For supply in grassy strips, in parking strips, in narrow areas, where there is a problem of uninterrupted water supply.

Final Word

You already know how to water narrow strip of lawn. It is most vital for you to have a garden on your property if you maintain it properly. The same place in your home can tarnish the appeal of cork. The green space next to your home can be an exciting possibility.

However, for that exciting possibility, you need to keep in mind that the success of any lawn requires the necessary maintenance and care. You can try the above methods for your garden.

We hope that you will be able to supply water to your narrow strip of the lawn without wasting too much water.