Is your sprinkler pump damaged? It needs to be replaced but you don’t know how to replace a sprinkler pump. Then this article is for you.
There are many reasons why your sprinkler pump may not work, such as the pump not running, no water, no sound coming from the pump, the sprinkler pump system not working as before, and so on. If these problems occur, you may need to have your sprinkler pump replaced.
In this article, I will discuss in detail how to replace a sprinkler pump. On-time it seems to have to spend a lot of money to bring a mechanic. But if you know how to do it, you can save time and money.
The following presentation shows you how to replace a sprinkler pump while maintaining your safety. So let’s get started.
When Does The Sprinkler Pump need To Be Replaced?
There are some external and internal features from which you can understand that your sprinkler pump needs to replace. Below are some of the functions.
- If the sprinkler pump is not on.
- If there is no water supply.
- If it doesn’t work the way, it can use.
- If there is an unusual noise inside the pump.
- When the pump burns the Injeel.
- When the drainage system of the pump system replaced.
How To Replace Sprinkler A Pump In Details
Here is this exact method of how to replace a sprinkler pump. If you follow these steps below, you will be able to return your pump.
Below are a few simple steps on how to replace a sprinkler pump. Read the presentation below.
Tools You Will Need
- Pvc pipe
- Pvc cement and primer
- Tape measure
- Waterproof marker.
- Fine sandpaper
- Pipe winch or channel lock plier
The process of work
Security must take first. It is necessary to ensure that all kinds of electrical communication are disconnected.
All electrical wires must carefully disconnect from the pump. And all PVC pipes connected to the pump must be cut and disconnected. At the same time, the old pump has to remove.
Of course in pumps, the connection is behind a metal plate or behind the cover that removes first. A couple of small screws must loosen to remove the cover.
Cutting the intel pipe with hacks for PVC connection with a coupling closes the fitting. Unscrew the other fitting from the tube, Which goes to the sprinkle. Remove any screws or bolts holding the pump to the floor.
Now it’s time to replace the new pump. According to the structured shoe, the PVC pipe should cut for the joint by measuring with a tape measuring, which will connect to the main tube.
The joints of the pipe should rub with sandpaper. Then apply PVC primer and PVC glue.
This time the pump has to put in its place.
PVC cement should apply across the joints. And make sure that the pipe joints firmly fix.
This is the last step. Now you have to cover the electric wires that have been left open. And you have to put the open metal bar. At the same time, all the bolts that are left open should apply.
When all the work is done, you need to check the pump. Whether it is working well, Turn on the main power supply and turn on the shoe. Your pump is ready to use if all the good work.
If it is doubtful whether the power supply to the pump has successfully disconnected, contact a licensed electrician for assistance before disconnecting the pump and reconnect the new one.
Moreover, gloves should use while using PVC glue so that the glue does not stick to the hands.
Now you know how to replace a sprinkler pump. How to return your pump if the sprinkler pump is damaged, has discussed in detail.
Sparkle pumps may need to replace for several reasons. Those are the reasons you have to choose
Before replacing the pump, the electric must disconnect from its well. PVC primers should also use with caution.
We hope our presentation on “How To Replace A Sprinkler Pump With 8 Easy Steps!” helps you to make your work done.