Mineral Oil for Axe Handle | Know How to Choose & Apply?

You are looking for an oil that will keep the handle of the axe smooth and shiny? Then you should read the following article. Oil is the most important thing for an axe handle.

Usually, handles made of wood. So it can be stingy or hand squeezing. A good oil axe can help keep the handles smooth and give a glossy dull shade.

In this article, we will discuss the oil for a wooden axe handle. We would recommend mineral oil for axe handles. We will give step by step information about mineral oil.

Let’s get started

Details of Mineral Oil for Axe Handle

Now we talk about mineral oil in detail. We will discuss step by step how to apply this oil.

What Is Mineral Oil?

Mineral oil is clear and colourless and odourless liquid oil. It is from highly refined and processed petroleum.

Mineral oil is also known as liquid petroleum. It consists mainly of hydrocarbon alkanes. It is to be safe for human use. This oil utilizes in many ways.

Mineral oil is the right choice. This oil will stay slick to sticky.

Mineral oil soaks and nourishes the wood from the inside out. After the oil dries, it strengthens the wood bonds, so no flaking stops.

Mineral oil made with non-toxic substances. However, oils like mineral oil are the best used on water-based stains to the natural look of the wood better than varnish.

Advantages of Using Mineral Oil for Axe Handle

There are some advantages to using mineral oil.

  • It is non-toxic oil.
  • Mineral oil gives the handle of the axe a natural look. So it is trendy.
  • It works on all types of wood handles.
  • Hydrates of mineral oil protect the wood from deformation.
  • Mineral oil resists wood shaking.
  • It penetrates deep into the wood and strengthens the wood structure.
  • Mineral oil dries faster than other oils.
  • This oil makes the wood smooth and shiny.
  • It is readily available and relatively inexpensive.

How to Apply Oil in The Axe Handle


How to apply oil to the handle of the axe is given below through three easy steps.

Step-1: Clean The Axe Handle

The first step in your axe handle is cleaning. Remove all sort of vanishing and coating with a vanish finisher.

Rub with a knife to remove the coating and uneven edges. This method will not lose the shape of the handle just to smooth. You need to clean with a towel or cloth.

This step has to done very carefully. Do not cut the varnish by hand while picking it up. Once the step is complete, you will be ready for the next level.

Step-2: Applying Oil in The Axe Handle

After thoroughly cleaning the handle of the axe, the next step is to apply mineral oil. The application of oil on the handle should make step by step.

First, apply a thin layer of mineral oil. Pour some oil into a clean container. Rub with a fresh piece of cloth and add a little oil.

The handle should be well covered with oil. The oil should apply in such a way that the axe is absorbed in the oil.

Oil should apply until the colour of the handle changes. If the oil lent, the handle should be dried.

Step-3: Let The Handle Dry

If the oil is covered, the handle of the axe should be allowed to dry. The axe should be placed in the sun or in the air to dry. Mineral oil usually dries quickly.

The process of drying oil depends on the weather. If the weather is unfavourable, the oil does not take long to dry. But if the weather is unfortunate, it takes a while for the oil to dry. Moreover, it takes patience to wipe the oil.

Step-4: Re-Apply The Oil on The Handle & Let It Dry

When the oil in the handle is completely absorbed, that is, when the handle of the axe is dry, the second step is to re-apply the oil coating on the handle of the axe.

In this method, the oil coating should fulfil at least three to four times. It may take some days to finish the whole step of applying the oil. The re-oiling step requires a little caution.

Once the oil application step is complete, the axe is ready for use when it dries thoroughly. The handle of the axe will be very smooth and shiny. To maintain this shiny regular oil coating should give.

Frequently Asked Questions

Ques: How much oil coating should apply to the handle

Ans: The handle should be oiled as thinly as possible. It can cause the oil to be absorbed quickly.

Ques: Does mineral oil act as a waterproof?

Ans: No, Mineral oil acts as water-resistant but not waterproof.

Ques: Is mineral oil to be applied with a brush?

Ans: No, mineral oil should be applied well by hand with a clean old cloth rag. It can control excess use of the product

Final Verdict

Mineral oil for axe handle is an ideal oil. It makes the handle of the axe more durable. It is preparing with non-toxic material.

Mineral oil is cheaper and more readily available than other oils. It makes the wood structure more reliable and more durable. Mineral oil resists water and dries faster than other oils.

Mineral oil using for axe handle is quite popular. It makes the handle smooth and shiny. It gives the wood.