How to Open PVC Cement Can? 2 Easy & Quick Opening Ways

When we are working with the PVC pipe, we need to join sections together. We can join the PVC pipe with the help of PVC cement. Before cementing the pipes together, we have to know how to open PVC cement. It is the priming process of cementing them together. The cement makes a water-tight bond between the PVC coupling and the pipes.

The PVC cement comes along with the primer, and that has an applicator at the bottom of the cap. It is hard to open PVC cement. While opening PVC cement, we may spill on the surface of the surroundings. We should be careful when opening PVC cement can to avoid spilling this on the surroundings. We should take some precautions before opening PVC cement because it is a solvent like cement.

In this article, we will help you to find the way how to open PVC cement.

How to Open PVC Cement- 2 Methods Step By Step

For the beginners who do not know how to open PVC cement, these two processes to open PVC cement is describing step by step below. If you follow the following, you will succeed in opening PVC cement.

Method 1: Open PVC Cement with Hands

Here we discuss how to open PVC cement can with freehand step by step.

Step: 1

At first, you have to place the newspaper on the surface of your working bench or table to cover the flat surface. It will help to prevent the cement from getting on the surroundings.

Step: 2

Then Grasp the can of PVC cement with one hand. At the time of removing the cap, firmly hold the cement cans so that it doesn’t turn. Then Grasp the lid with the free hand and rotate it counterclockwise to remove the cap from the can.

Step: 3

If the top does not budge, then adjust the jaw with a firm grip around the perimeter of the can. This problem often happens when we try to open used cans of cement. Adjust the clamp so that the jaw is not crushed and lock firmly around the top.

Step: 4

Hold the can firmly in your one hand. Then turn the top of the can counterclockwise with the freehand. Use the vise grips for extra leverage. It will help you to turn the lid. Once the lid begins to unscrewed, remove the vise grips.

Step: 5

After the top turn, pull it away from the can. While putting the top make it slowly. Scrap the edges of the applicator attached with the cap against the inside of the can. Scraping the applicator will help to remove any excess cement from the applicator and prevent dripping.

Method 2: Open PVC Cement Can with Rubber Strap Wrench

If you could not open PVC cement can with hand, there is a tool to open the can. It is the rubber strap wrench. It will make the opening of the PVC cement can easy for you.

The process to open PVC cement can with rubber strap wrench is given step by step here.

Step: 1

At first, you have to place the newspaper on the surface of your working bench or table to cover the flat surface. It will help to prevent the cement from getting on the surroundings.

Step: 2

Pull the loose end of the rubber strap from the wrench handle makes a loop at the size of the can cap.

Step: 3

Slide the loop of the rubber strap wrench over the laid of the PVC cement can. Pull the free end of the strap and tighten the strep around the can top. Apply counterclockwise pressure on the wrench handle to lock the rubber strap into the handle.

Step: 4

Apply counterclockwise pressure until the cap of the can be unscrewed or turned.

Step: 5

Once the cape begins to turn, Then pull the handle towards you, lose the rubber strap from the wrench handle then lift the rubber strap from the can.

Step: 6

Then pull the top of the cap away from the cam very genteelly. You Scraping on the edge of the applicator, attached with the cap against inside the can. By doing this will help you to remove extra cement from the applicator and will prevent dripping.

What Not To Do

Do not open the can without gloves and safety glasses, or it will harm your skin and eyes.

Don’t cut the can with the kitchen can opener if you want to use the same glue further. Don’t grip so hard that the top of the can get squeezed or broken; it will make the opening of the can harder.

Once you get it open, seal back up. The cement may last 6 months, so bye small quantities.

Frequently Asked Questions

Ques: What is PVC cement?

Ans: he PVC cement is clear solvent cement, specially formulated to bond PVC pipe and fittings.

Ques: How does PVC cement work?

Ans: The PVC solvent cement works by softening the pipe and fitting the surface and form a unifying bond.

Ques: What is PVC glue?

Ans: PVC cement or glue is a resin solvent specially formulated to bond PVC pipe and fittings.

Ques: Can’t get PVC cement can open?

Ans: Follow the above instruction to open the PVC cement can.

Ques:  What is rubber strap wrench used?

Ans: It is all-purpose and adjustable. For different plumbing applications, it is used. The strap wrench utilizes the tension of the strap to grip without scratching or damaging anything.

Final Words

We have come to know how to open PVC cement can from this article. It becomes hard to open PVC cement for some people the first time or after use. If you follow those steps, you can make the opening of the PVC cement easy. And also, you should take all the necessary precautions before you get to try to open PVC cement can.